M.S.C. Cincinnati, OH
513.677.3311 		"Converting Systems & Solutions"
Celebrating 101 Years of Service 1907-2008

M.S.C. St. Louis, MO
314.770.0880

F.E.B.A. THREE-HEAD SAWING MACHINE

Open House Cincinnati, OH
F.E.B.A. Three-Head automatic electronic sawing machine suitable for slitting protection film tapes from reels wound with polyethelene, polypropelene and similar materials. This system is capable of slitting logs up to 2600MM in width with diameters up to 550MM. The machine is equipped with three circular cutting saw-blades at 600MM OD with automatic stainless steel guards. The first cutting head is fixed, while the second and third are mobile to suit the different desired cutting widths. These heads can be separately released when cutting is not required. Machine is completely protected with lexan guarding and safety switches and manufactured in accordance with European EEC regulations.
·   4220 Rider Trail North     ·   St. Louis, MO 63045     ·   TEL: 1-314-770-0880     ·   FAX: 1-314-770-0990
Email information@mfgsup.com

TECHNICAL SPECIFICATIONS
MAXIMUM MATERIAL WIDTH 2600MM
MAXIMUM LOG DIAMETER 550MM
MINIMUM LOG DIAMETER 200MM
INTERNAL CORE DIAMETER 76MM
CUTTING WIDTHS 500-2600MM
CUTTING TOLERANCE +/- 0.5MM
BLADE SPEED RANGE 1200-2800 RPM
MATERIAL SPEED RANGE 0-500RPM
ELECTRICAL SUPPLY 220V/3PH (OTHERS BY REQUEST)
COMPRESSED AIR REQUIREMENTS 30LT/MIN. @ 6ATM.
SUCTION SYSTEM REQUIREMENTS MIN. 3500m3/h (OPTIONAL)
SLITTING HEADS
¨           THREE FULLY INDEPENDENT SAW BLADES VIA 7.5KW AC MOTORS
¨           THREE 600MM CIRCULAR SAW BLADES WITH AUTOMATIC STAINLESS STEEL GUARDS
¨           SAW BLADES SPEED RANGE
          ¨           SPEEDS FROM 1200-2800RPM VIA SSD AC DIGITAL DRIVE
          ¨           ACCELERATION AND DECELLERATION RAMPS
¨           THE SLITTING HEADS ARE POSITIONED ON PRECISION-GROUND LINEAR BEARINGS, PROVIDING LOW
                FRICTION TRAVEL AND OPTIMUM ACCURACY
¨           TRANSVERSAL DISPLACEMENTS OF THE TWO MOVABLE CUTTING HEADS ARE PERFORMED BY BRUSHLESS
                MOTORS AND RECIRCULATING BALL-SCREWS THAT GUARANTEE PRECISION AND RAPID POSITIONING
¨           OPERATION OF THE SLITTING HEAD IS CANTILEVERED AND IT'S SLITTING MOVEMENT IS EFFECTED BY
                AN ELECTRIC ACTUATOR WHICH PROVIDES SMOOTH TRAVEL, THUS PRODUCING ACCURATE SLIT ROLLS
¨           ADJUSTABLE ELECTRIC SAW-BLADES PENETRATIONS SPEEDS WITH:
          ¨           FAST APPROACHING TO THE EXTERNAL DIAMETER OF THE ROLL
          ¨           ADJUSTABLE MATERIAL SPEED (AUTOMATICALLY STORED INTO PLC)
          ¨           AUTOMATIC SETTING OF ROLL DIAMETER VIA SONAR PHOTOSENSOR
          


 		ROLL HOLDING DEVICE
¨           THE MACHINE IS FITTED WITH TWO STEEL SHOULDERS CONNECTED BY RODS
¨           THE REEL POSITION FOR THE FIRST CUTTING IS GUARANTEED BY A POWERED MOBILE GIUDE
                AND AN ELECTRIC ACTUATOR ON BOTH SIDES
¨           3KW AC MOTOR FOR THE SPEED ADJUSTMENT OF THE MATERIAL, FROM 0-500RPM WITH LED
                DISPLAY AND EUROTHERM DIGITAL DRIVES
¨           TWO RUBBER COVERED ROLLS TO HOLD THE LOG IN PLACE WITH TWO HYDRAULIC WORKING
                POSITIONS
          ¨           ONE FOR LOGS FROM 20O-350MM OD
          ¨           ONE FOR LOGS 350-550MM OD
¨           THE MACHINE IS EQUIPPED WITH TWO HYDRAULIC REEL DOWNHOLDING DEVICES DURING
                THE CUTTING CYCLE
¨           THE F.E.B.A. ELECTRONIC AUTOMATIC THREE-HEAD SAWING MACHINE IS EQUIPPED WITH TWO
                CONTROL PANELS:    ONE MOBILE AND ONE FIXED.
¨           ALL F.E.B.A. SLITTING SYSTEMS ARE FITTED WITH ELECTRIC PHOTO SENSORS WHICH INFORM
                THE PLC THAT THE FOLLOWING FEATURES ARE OPERABLE BEFORE AUTOMATIC OPERATION IS
                CARRIED OUT:
          ¨           GUARD UP AND IN PLACE
          ¨           REEL DOWNHOLDING DEVICES DOWN AND IN PLACE
¨           THERE IS A SELECTOR TO RUN THE MACHINE ONLY WITH LOG RAOTATION WITH THE GUARDS
                OPEN JUST FOR THE POSSIBILITY OF A MANUAL CLEAN CUT.
INDUSTRIAL PLC TELEMECHANIQUE MAGELIS LEVEL 4 TOUCHSCREEN

          ¨           ALPHA NUMERIC DISPLAY
          ¨           FULL DIAGNOSTIC CONTROL
          ¨           SOILD STATE ALARM
          ¨           SAWING MACHINE INSTRUCTIONS WITH FAULT FINDING
          ¨           ALL SLITTING OPERATIONS STORED INTO PLC, INCLUDING:
                    ·           SLIT WIDTHS
                    ·           LOG SPEED (RPM)
                    ·           SAW BLADES SPEED (RPM)
                    ·           PENETRATION SPEEDS (APPROACH AND MATERIAL)
                    ·           AUTOMATIC POSITIONING OF THE SAW BLADES TO OD OF LOG
                    ·           10"X10" TOUCH COLOR SCREEN
                    ·           CAPABLE OF SAVING 300 JOBS
                    ·           ASSISTANCE FROM MSC VIA MODEM (INTERNET CONNECTION)

          
ALL F.E.B.A. SLITTING AND REWINDING SYSTEMS ARE MANUFACTURED IN ACCORDANCE WITH EUROPEAN EEC SAFETY AND HEALTH STANDARDS.

Roll Slitters     F16C     F400     F600     F700     2L- 400     2L-350      4L-400      Sawing Systems    


·   4220 Rider Trail North     ·   St. Louis, MO 63045     ·   TEL: 1-314-770-0880     ·   FAX: 1-314-770-0990
·   106 Commerce Blvd.     ·   Cincinnati, OH 45140     ·   TEL: 1-513-677-3311     ·   FAX: 1-513-677-3423
Email information@mfgsup.com

© Marcofirm Law Offices of Michael Tracy