M.S.C. Cincinnati, OH
513.677.3311 		"Converting Systems & Solutions"
Celebrating 101 Years of Service 1907-2008

M.S.C. St. Louis, MO
314.770.0880

FEBA 2L-350 Dual Spindle-Double Knife Lathe Slitting System

Open House Cincinnati, OH
The FEBA 2L-350 Dual Spindle-Double Knife Lathe Slitting System is a high production log slitter which slits two rolls of material simultaneously using two mandrels and two slitting blades. It is the ideal system for slitting adhesive and non-adhesive tapes, foam tapes, foils, kapton, paper, PVC, nonwovens, laminated and coated materials up to 350mm in outside diameter. The model 2L-350 comes standard with AC Brushless motors for X & Y carriage displacement (Level 4 Series), 10" color touchscreen, automatic blade AXIS angle adjustment, automatic blade holder positioning system, sonar & laser technology for automatic roll acquistion & automatic pneumatic shaft holder device. This slitting system is the ideal solution for medium and large adhesive tape converters & manufacturers.
    
Technical Specifications
Maximum Material Width 1.200mm-2.200mm
Maximum Material OD 2 x 350mm
w. 2 x 400mm OD Blade
-Core ID 1.5"--6"
Slitting Widths 2---2.200 mm
Cutting Tolerance ± 0.05mm
Blade Speed Range 0-1000RPM
Mandrel Speed Range 0-1000 RPM
    
Main Operating Features
  • Two ea. circular slitting blade @ 400mm in OD with guard in stainless.
  • Automatic twin double-sided blade polishing unit with 2 x 0.25 kW motors (total 4 ea. motors)
  • Adjustable proportional blade penetration speed via brushless motor.
  • Automatic acquisition of log's diameter by sonar.
  • Automatic acquistion of blades diameter via laser.
  • Automatic blade holder positioning system.
  • Adjustable dwell period for the holding of the blade against the shaft to perform clean core cutting.
  • Automatic Blade AXIS Angle control for each slitting carriage.
  • Two 3" rotating shafts (other sizes available upon request) covered with rubber sleeves with automatic internal material gripping device.
  • Automatic Pneumatic Shaft Holder Device.
Available Options
  • Automatic Front Guard Lifting Device.
  • Semi-Automatic Trolley to Load Logs In-Line with Shaft.
  • Automatic External Material Gripping Device
OMRON Industrial PLC 10" COLOR TOUCHCREEN for material/slitting recall data with:
  • Alpha-numeric display.
  • Full diagnostic control.
  • Solid state alarm.
  • Lathe slitting instructions with fault finding.
  • All slitting operations stored into PLC including;
    -slit widths
    -quantity per slit width
    -partial & total counter for production
    -dwell timer
    -blade direction (CW, CCW or Freewheel)
    -mandrel direction (CW, CCW)
    -blade & mandrel RPM
    -proportional penetration speeds
    -core cut speeds
    -lubrication control
    -blade polishing timer & frequency
    -automatic blade 'AXIS' angle control
    -PC connection (option)
    -MODEM link to M.S.C. & F.E.B.A.
    -400 recipes available
All F.E.B.A. lathe slitting machines are fitted with electronic photo sensors which inform the PLC that the following are operable before automatic operation is carried out:
-guard down & in place
-all doors are closed (safety interlocks activated)
-shaft holder up and in place
This is in accordance with 1995 EEC regulations.

All electrics and controls are manufactured in accordance with CENELEC 60204-1.

Roll Slitters     F16C     F400     F600     F700     2L- 400     2L-350      4L-400      Sawing Systems    


·   4220 Rider Trail North     ·   St. Louis, MO 63045     ·   TEL: 1-314-770-0880     ·   FAX: 1-314-770-0990
·   106 Commerce Blvd.     ·   Cincinnati, OH 45140     ·   TEL: 1-513-677-3311     ·   FAX: 1-513-677-3423
Email information@mfgsup.com

© Marcofirm Law Offices of Michael Tracy