The new XT range of dieless knife cutting systems was designed for a wide range of industrial fields including; card-board & printing, technical textiles, composites, gaskets & general converting.

The continuous cutting operation performed by the conveyor-bed offers maximum production and through-put of cut parts. The material is fed onto the bed of the machine into the "cutting zone" (material can be in roll or sheet form). Once the components are cut, the conveyorized-bed feeds to a take-off area located at the front of the machine. The operator can strip the cut parts while the machine automatically reloads the material and the cutting process continues.

Main Features
Multi-Sector Zoned Vacuum System
Easiness to change from static bed to conveyorized bed
Variety of powerful vacuum pumps
Variety of ATOM cutting heads
Improved Powered Rotary Cutter (PRC)
Interactive layout software for machine control

XT 1630 (1.630mm x 1.680mm)
XT 2200 (1.630mm x 2.200mm)
XT 3050 (1.630mm x 3.050mm)

Non-movement of the material during cutting is of primary importance for repeatability and accuracy. Therefore, the new XT series was equipped with the same multi-sector zoned vacuum system as the traditional ATOM Flashcut.

Suction by sector is now an automatic function, which controls the opening of the necessary sectors pertinent to the material shape and size by means of a dedicated software control.

With the new designed tables the sectors have been redistributed so we can use the same architecture for both the static bed & conveyorized bed. This feature is useful for customers who wish to retrofit their static bed to a conveyorized bed in the future.

Variety of Powerful Vacuum Pumps

According to the system's size, type of material to be cut & possible noise limitations, we can supply vacuum pumps with different power such as;

-4 kW low level noise pump, for small sized tables and or non-porous materials, covering the whole cutting area where the vacuum sectors are open.

-5.5 kW pump, a perfect match of noise, consumption and performance, for medium sized tables and a wide array of materials.

-11 kW pump, for medium/large sized tables, for porous or semi-porous materials, when a strong suction is necessary to get a rapid and accurate cut.

-4 + 4 kW pumps, the flexible solution, combining strong suction and energy savings & noiseless operation.

-5 Tool Cutting Head (knife chuck {electric, pneumatic, PRC or tangential}, pricker tool, plotting pen & two punching tools or creasers).

-4 Tool Cutting Head w. Camera (knife chuck{electric, pneumatic, PRC or tangential}, plotting pen & two punching tools or creasers).

-2 Tool Cutting Head (knife chuck{electric, pneumatic, PRC or tangential} & plotting pen.

A 20W motor drives the cutting wheel (turning @ 5,000 rpm) granting a consistent cut, ideal for several kinds of textiles (technical included). The PRC chuck can mount two different wheels: a decagonal tool with 28,, diameter and a dodecagonal tool with 36mm diameter suitable for cutting technical textiles like aramid fabrics, "Goretex" and "Cordura". Standard pizza wheel knifes are also available both in carbide and steel, suitable for fabrics like cotton, wool & silk.

Software forms a key element to all CNC systems. With ATOM's powerful nesting software, you have the ability to nest parts within parts enhancing production efficiency and reducing material scrap, creation of nest lists, & job storage. ATOM's software, unlike traditional CNC dieless system suppliers, is designed in house by ATOM engineers so you do not have to rely on a 3rd party for SW support.