dieless machinery - Manufacturers Supplies Company
Your browser does not support Java(tm) Please download Java(tm).

FEBA Simple Laminating, Slitting & Rewinding Machine

F.E.B.A. Laminating System is suitable for laminating, slitting and rewinding heat-activated or cold-bond adhesive products to fabrics, foam/rubber, soft foam, cork, felt and similar materials. Standard and special machines available to suit the customers specific converting application.
·   4220 Rider Trail North     ·   St. Louis, MO 63045     ·   TEL: 1-314-770-0880     ·   FAX: 1-314-770-0990
Email information@mfgsup.com

TECHNICAL SPECIFICATIONS (Standard)
Maximum Material Width 1600MM (63")
Maximum OD of Master Jumbo Roll 1200MM
Material Thickness 2-30MM
Maximum OD of PSA 500MM
Core Inside Diameter 3"
Maximum Output Speed Up to 35M/Min.
Maximum OD of Rewound Roll 1200MM

COMPONENT’S DESCRIPTIONS

UNWIND UNIT

  • The unwind unit is composed of one station for the axial unwinding of the master logs. Manual web guide left and right.
  • One 3" removable pneumatic shaft and brake.

DRAWING UNITS

  • The first drawing unit is composed of two large diameter siliconized rubber covered rolls; suitable for the unwinding of high and low thickness foam rolls.
  • The second drawing unit is composed of two large diameter siliconized rubber covered rolls and will be equipped with a separate brake and clutch to be used when laminating very thin elastic materials or slitting narrow widths.

UPPER UNWIND

  • The upper unwind is to keep the single sided tape to be transferred. Manual web guide left & right.
  • The unit is composed of a 3" removable pneumatic shaft and brake.

LOWER UNWIND

  • The lower unwind is to keep the single sided tape to be transferred. Manual web guide left & right.
  • This unit is fitted on a removable trolley and fixed with pins.
  • The unit is composed of a 3” removable pneumatic shaft and brake.

HEATING UNIT

  • The heating unit is equipped with three individual infrared lamps with temperatures ranging from 0-700 degrees Fahrenheit, which is ideal when laminating heat-activated adhesives.

SLITTING UNIT

  • One heavy-duty scissor cut slitting unit with 120MM OD blades and counter-blades. (Minimum Slit Width of 2")

REWIND UNIT

  • The rewind unit is driven and is composed of one station for the axial unwinding of the master logs. Switch for rewinding CW or CCW.
  • Tension adjustment for precise tension control.
  • One 3" removable pneumatic shaft.

Available Optionals

Automatic End Cut Unit for Sheeting
Pneumatic Up/Down Unit for IR Lamps
Extra Rapid "KRELUS" IR Lamps
Automatic Web Guides
Dancer Arm to Feed Material In Line
Paper Recovery Station
Duplex Rewind Station