|
SYSTEMS MAIN OPERATING FEATURES
|
| ·
|
One unwinding unit with pneumatic shaft.
|
| ·
|
Mechanical wind up speed regulator complete with AC servo motor with push button and pedal.
|
·
|
Manual inflation and deflation of all pneumatic shafts.
|
| ·
|
Mechanical meter counter with wheel feeler.
|
| ·
|
Path rollers covered in silicone rubber.
|
| ·
|
Table with automatic web guide to keep the material straight.
|
|
|
UNWIND STATION
|
|
|
| ·
|
The unwind station is composed of one station for the axial unwinding of the logs. This unit is equipped with one pneumatic cantilevered shaft and the pneumatic brake is manually controlled.
|
| ·
|
Automatic web guide composed of two photocells and one AC electric actuator which moves left or right if the material comes out of the path of the photoelectric eyes.
|
·
|
The unit is fixed on four wheels and is linked to the laminator through two rails and two pins for quick release and material change.
|
|
|
DRAWING UNIT
|
|
|
| ·
|
The drawing unit consists of two large diameter silicone covered cylinders suitable for unwinding various materials from 2-30MM in thickness.
|
| ·
|
The two cylinders are designed to accept the connection of a hot oil unit if desired. (Internal fillet of the cylinder's ends=3/4")
|
·
|
The unit is fixed on four wheels.
|
|
|
SLITTING UNIT
|
|
|
| ·
|
Free Slitting Unit (Blade and Counterblade)
|
| ·
|
Mechnical Rotating Slitting Unit
|
|
UPPER UNWINDER
|
|
|
| ·
|
The first upper unwind unit is to keep the single sided tape to be transferred.
|
| ·
|
The unit is composed of one cantilevered pneumatic shaft and brake.
|
·
|
The second lower unwind unit is to eventually recover the siliconized paper (if you need to apply a double sided tape and remove the paper).
|
| ·
|
Both unwind units are composed of two cantilevered pneumatic shafts and brakes.
|
| ·
|
Manual axial adjustment (PSA log left & right).
|
|
|
DANCER ROLLER
|
|
|
·
|
One aluminum dancer roller complete with two pneumatic pistons, one potentiometer with reference from 0-5 kohm and one pneumatic dual powered electrovalve.
|
|
|
REWIND STATION
|
|
|
| ·
|
One rewind station designed to rewind the finished log up to 1000MM in outside diameter. This unit is equipped with one pneumatic cantilevered shaft and the pneumatic brake is manually controlled.
|
| ·
|
The unit is fixed on four wheels and is linked to the laminator through two rails and two pins for quick release and material change.
|
|
|
AVAILABLE OPTIONS
|
|
|
| ·
|
UV Heated Lamp
|
| ·
|
Infrared Heating Lamp (0-700 Degrees)
|
| ·
|
Hot Air Fan
|
| ·
|
Automatic End Cut Unit for Sheeted Goods
|
|
