|
|
|
STB Cementers |
|
|||
|
|||
|
The STB Cementer is a low cost adhesive roll coating machine designed for coating thin parts with a water based adhesive. It can be used to apply water based adhesive, heat seal coating, and latex adhesive. It is an ideal machine for coating fabrics, thin leather, cloth, paper, chipboard and stuffed envelopes for gluing to the outside of boxes. This machine is available in three sizes: 6", 7" and 12".
·
4220 Rider Trail North
·
St. Louis, MO 63045
·
TEL: 1-314-770-0880
· FAX: 1-314-770-0990
Email information@mfgsup.com |
|||
|
The thickness of the adhesive layer deposited by the machine is controlled by adjustment of the gap between the adhesive pickup roller in the tank and the coating roller. This type of adjustment makes the machine capable of coating a precisely controlled layer of adhesive. The machine is equipped with dual stainless steel feedrolls, and can coat parts 3/16" thick. The adhesive pickup roller in the STB cementer rotates at a low speed, which reduces the tendency for adhesive foaming- an important factor when coating with latex cement.
|
   
|
    
|
|
|