The HM series roll coater applies a thin layer of hotmelt adhesive to the part as it passes over the coating roll. Coating thickness can be adjusted with a dial on the top of the machine. The coating roll applies a thin layer of hotmelt to the part, but the layer cools quickly, and the part can be handled immediately as it exits the gluing machine. A powered feed roller presses the part against the coating roller to be sure that it receives a full coating of glue.
The HM series hotmelt roll coater is equipped with adjustments for feed roll height (application of adhesive to parts up to 1 ½" thick), coating thickness, coating roller speed, and adhesive temperature.
This machine has two electronic temperature controls. One is for adhesive melt chamber, and the other for the coating roller tank. The dual controls allow precise control of adhesive temperature - within 1 degree F.
This hotmelt roll coater has a cantilevered feed roller, so it can be used to apply adhesive coating to either a strip along one edge of a part or it can be used to for adhesive application to the full surface of the part (up to the full width of the coating roller). An adjustable feed guide is mounted to the feed table to ensure consistent and accurate adhesive application when coating only a section of the part.
This machine is widely used for gluing applications in many different industries: shoe manufacturing, leather goods assembly, foam fabrication, packaging, product labeling, automotive interior trim parts and many other types of product gluing and assembly work.
|
