|
|
|
HOT MELT AND WATER BASED ADHESIVES |
|
·
4220 Rider Trail North
·
St. Louis, MO 63045
·
TEL: 1-314-770-0880
· FAX: 1-314-770-0990
Email information@mfgsup.com |
HOT MELT ADHESIVES |
||||||||||||||||||||||||||||||
|
· U1012 This is our lowest cost, general purpose adhesive used in packaging, wood bonding, floral design etc. It is clear in color yet has a high enough viscosity to give a good hot tack. This is an excellent, inexpensive general purpose workhorse. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U1022 A general purpose hot melt specifically designed for porous susbstrates which is excellent for paper, cardboard, fiberboard, and fabric. Low viscosity gives both excellent penetration and high delivery rate. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U1032 A good medium viscosity clear adhesive for general purpose applications. This product will bond a wider range of materials than our U 1012. Has good adhesion to many plastics as well as most porous substrates. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U1052 Our best clear hot melt. Bonds a wide variety of materials for general purpose applications. The U1052 is excellent for difficult applications in novelties, mirrors, plastics, speakers, jewelry cases etc. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U1062 Our best, most aggressive EVA, outstanding general purpose hot melt. Dark tan in color, medium viscosity for high delivery rate. Excellent for a variety of uses including packaging, toys, games, luggage and product assembly. Especially effective on porous substrates such as wood, particleboard and cardboard. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U1072 An economical polyamide with excellent adhesion to porous substrates in a wide variety of general purpose applications. A good multi purpose product when properties of a polyamide are required. Also useful in packaging applications where high temperature resistance is required. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U1082 A superior and versatile polyamide with excellent low temperature and flexibility. This product will give you superior bonds to a wide variety of difficult substrates in product assembly applications. It will bond ABS, nylon, polycarbonate and PVC as well as epoxy coatings. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U1092 This polyester based product is designed for demanding product assembly applications requiring adhesion to difficult substrates as well as good flexible bonds over a broad temperature range. It offers sufficient open time to allow careful positioning but still gives rapid development of full bond strength. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U1323 A general purpose adhesive recommended for use on a wide variety of substrates. It exhibits low viscosity for good penetration and fairly long open time. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U2161 & U2165 The shortest open time of our extended open time products. This adhesive gives good adhesion to metal, wood, ABS, polycarbonate, foams, leather and other porous substrates. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
· U2171 & U2175 This is an extended open time hot melt used for automotive applications. It also offers good adhesion to metal, wood, ABS, polycarbonate, foams, leather and other nonporous substrates. It sprays and extrudes very well. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U5512 & U1512 This hot melt has an excellent adhesion to most substrates. It is used extensively in the automotive trim industry. This hot melt should be used when a premium product is needed for difficult substrates. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U2191 & U2195
Where long open time is required, this sprayable hot melt provides excellent adhesion for product assembly, woodworking, leather and textile applications. This product provides good adhesion to metal as well as porous and nonporous substrates. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U2591 & U2595
This hot melt was specifically designed to form a quick cohesive bond which will take up elastic forces while bonding. It is used mainly in foam to foam, foam to wood, foam to plastic (ABS, polypropelene etc.) and foam fiber fill applications in the furniture industry. It also has good adhesion to most porous and nonporous substrates and is an excellent all around adhesive. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U2601 & U2605
This adhesive has a very high heat resistance when bonding porous substrates. It forms a very strong bond and has a good open time. It is used in automotive and trim assembly(trunk parts) and also for foam to foam applications. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1141
This adhesive is a low viscosity hot melt designed for adhering materials that are extremely difficult to stick. It exhibits good adhesion to a wide variety of plastic and plastic coated substrates. The U1141 also has an excellent cold flexibility and a good thermal stability. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1341 & U1342
A medium viscosity packaging EVA, this product has a short open time and a high hot tack. The viscosity is high enough to prevent excessive soaking in on porous substrates. It has a high enough heat resistance to withstand temperatures encountered shrink tunnels and summertime temperatures. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U2134
A low cost, general purpose polypropylene capable of replacing many multi-purpose formulations. Uses include product assembly for the electronics industry, floral and decorative bonding, carpet backing and installation of acoustic insulation. Clear in color, this product has a good molten stability and a good open time. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1351 & U1352
A general purpose EVA with a long open time and a low viscosity. It has a good adhesion to a wide variety of substrates including wood and cardboard and plastics such as nylon, polycarbonate, PVC, polystyrene, ABS and acrylic. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1125
An excellent pressure sensitive, general purpose adhesive. This medium viscosity, sprayable hot melt is designed for a wide variety of uses including product assembly, metal bonding, plastics, insulation, paper and wood. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U2274
This product is a low cost hot melt adhesive which can be used for many applications including packaging and automotive trim. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U6340
This adhesive is a long time moisture curing polyurethane. It has excellent adhesion to a very wide variety of substrates. Since it has a post-cure, it laso has very high heat, solvent, water and environmental resistance. It can be used for most plastics and metals. . |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1463
The U1463 is a tan general purpose adhesive recommended for use on a wide variety of paperboard, chipboard and fabrics. A low viscosity and medium to long open time makes this product particularly suitable for many product assembly applications. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U2101 & U2105
Our all purpose, low viscosity, good open time sprayable hot melt designed for a wide variety of uses. This excellent, general purpose hot melt will find countless applications in woodworking, leather, packaging and product assembly applications. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1095
The U1095 is a hot melt for packaging and product assembly work in the paper and cardboard industry. The working temperature is low and it is suitable for bonding polystyrene foam. This hot melt has a short open time and possesses good bonding properties for a variety of materials |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U2234 A low cost general purpose polypropylene capable of replacing many multi-purpose formulations. Uses include product assembly for the electronics industry, floral and decorative bonding, and in the automotive industry as an upholstery aid. White in color, this product has a longer open time than the U2134. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1473
This is a clear general purpose grade adhesive suggested for a wide variety of applications. It will generally be of most value when used on porous substrates such as paperboard, soft wood, fabric and foam. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U6338
The U6338 is a long open time curing polyurethane. It is intended for assembly applications in the furniture, metal and plastic bonding uses. This assembly product has almost universal applications. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1321
The U1321 is a general purpose adhesive recommended for use on a wide variety of substrates. It exhibits low viscosity for good penetration and has a fairly long open time |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
·
U1011
Our lowest cost, general purpose adhesive. This product may be used in packaging, wood bonding and floral design, etc. It is clear in color, yet has a high enough viscosity to give a good hot tack. This is an excellent, inexpensive, general purpose workhorse. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
WATER BASED ADHESIVES |
||
|
·
LD100
Fast setting adhesive for gluing paper labels to paperboard, corrugated, paper and glass. Lamination of paperboard and chipboard. |
||
|
·
LF150
Adhesive with extended tack time to allow repositioning and smoothing of wrinkles on large labels, posters and printed sheets. Excellent layflat characteristics for mounting large labels or facesheets to paperboard, corrugated, foamcore and bonding labels to glass. |
||
|
·
LR200
An excellent fast setting general purpose adhesive with a high wet tack. Provides a bond with a high degree of moisture resistance. For bonding labels to glass, plastic bottles, metal cans, paperboard, and corrugated. Also used for bonding foam to corrugated and for corrugated buildups. |
||
|
·
IP320
Casein base adhesive that provides a water resistant bond. Able to withstand a two hour immersion in ice water. Used for bonding labels for champagne, beer and wine bottles. |
||
|
·
CL300
For gluing coated label stocks with varnished or coated glossy surfaces that are difficult to bond with other adhesives. |
||
|
·
CA304
Forms a bond line with a light residual tack. For bonding high-gloss painted surfaces, epoxy paints and certain plastics. |
    
|
   
|
|
|